CDS Hardwood Floors

Screen and Recoat Hardwood Refinishing in MD, VA & DC

Quick Answer

A screen-and-recoat lightly abrades your existing finish and applies a fresh coat — restoring sheen and adding years of protection without a full sand-down.

MHIC #141267

Fully Insured & Bonded

15+ Years Experience

Family-Owned

If your floors are worn but not damaged — dull spots in walkways, minor surface scratches but no gouges or discoloration — a screen-and-recoat is the smartest maintenance you can do. It costs a fraction of a full refinish and can be completed in a single day.

We buff the existing finish with a fine-grit screen, vacuum thoroughly and apply one or two coats of Bona or Loba finish. You keep your existing stain, no dust barrier is needed, and the room is walkable in 24 hours.

Key Takeaways

The right maintenance every 5–7 years
Won't fix deep scratches or discoloration — that's a full refinish
Same-day completion in most rooms

Benefits

• 1/3 to 1/2 the cost of a full refinish
• Completed in one day for most rooms
• No dust — just light buffing debris we vacuum up
• Extends the life of your existing finish by 3–5 years

Our Process

1. Deep clean
Remove wax, polish, dirt and residue.
2. Screen the finish
Buff with a fine 120–150 grit screen to give the new coat something to bond to.
3. Vacuum & tack
HEPA vacuum then tack-cloth wipe.
4. Apply finish
One or two coats of Bona or Loba, buffed between if a second coat is applied.

Ready to talk about your project?

Schedule a consultation (240) 731-7030

Materials We Use

• Bona Traffic HD or Bona Mega ONE
• Loba 2K Supra AT
• Fine-grit sanding screens

What to Expect

• Walk on socks after 24 hours
• Rugs back after 7 days
• Full cure in 14 days

What Affects Pricing

We don't publish flat pricing — every home is different. These are the factors we weigh in your written estimate:

• Square footage
• Whether one or two coats are applied
• Sheen selection

Common Problems & How We Solve Them

Cloudy result

Caused by residue from vinegar, Murphy's or wax. Full strip required first — we test before quoting.

Won't adhere

Aluminum-oxide factory finishes on prefinished floors sometimes reject recoat unless properly abraded and primed.

Maintenance Tips

• Same as post-refinish: Bona cleaner, felt pads, no steam or vinegar.

Warranty & Guarantee

All CDS craftsmanship is backed by our workmanship guarantee. Manufacturer finish warranties are transferred to you in full.

Why Choose CDS Hardwood Floors

Family-owned, licensed (MHIC #141267), fully insured and bonded, with 15+ years serving Maryland, Virginia, DC, West Virginia and Pennsylvania. Our craftsmanship has earned us landmark commercial work (including DAR Constitution Hall in Washington, DC) alongside thousands of luxury residential projects.

Frequently Asked Questions

How long does screen and recoat take in a typical home?

Most residential projects are completed within 3–7 working days, depending on square footage, drying times and any repairs required. We provide a firm timeline in your written estimate.

Do I need to move out during screen and recoat?

In most cases, no. Our dustless equipment keeps the home habitable, though we recommend staying off finished areas for 24–72 hours to let the finish cure.

Can I schedule a consultation?

Yes. Every screen and recoat project starts with a free on-site consultation and a detailed written quote, usually delivered within 24 hours.

Are you licensed and insured?

Yes. CDS Hardwood Floors is a Maryland-licensed contractor (MHIC #141267), fully insured and bonded for your protection.